(+99412) 460 7021
(+99450) 273 2640

Katimex PIPE EEL Ø 11 MM WITH SERVICE SET AND BAG


Pipe Eel was introduced in 1974 as the world‘s first cable pulling device to be equipped with a high-quality Polykat® fibreglass profile. The combination of stability under shear stress and flexibility was a considerable improvement on traditional cable pulling aids. Work was made so much easier as the Pipe Eel was very light and easy to use and soon became popular with telecom engineers and for power cabling on construction sites. Today, as then the device allows the pulling of light and medium duty cables in one simple run. Attachments such as cable grips or pulling eyes can be connected with both ends of the rod. The duct rodder Pipe Eel - Röhrenaal® is a corrosion proof, completely galvanized steel tube construction. The cage itself has special bearings and the largest type Ø 1000 mm can take up to 500 m Polykat® fibreglass profile. An integral brake ensures that the Polykat® fibreglass profile reels out of the basket as desired. Glued and bolted rod ends with a M12 thread
You may also be interested in following products ...
Katimex KATI® TWIST 2.0
Katimex CABLE SUSPENSION GRIP, DOUBLE EYE WITH THIMBLES
Katimex CABLE SUSPENSION GRIP, SINGLE LATERAL EYE WITH THIMBLE
Katimex CABLEJET PULLING ROD
Katimex PULLING ROD FOR PIPE EEL Ø 9 MM
Katimex CABLE GRIP WITH INTEGRAL SWIVEL
Katimex PULLING ROD FOR PIPE EEL Ø 11 MM
Katimex KATI® TWIST 2.0 PULLING ROD
Katimex MULTIPLE CABLE GRIPS – DOUBLE EYE – GALVANIZED STEEL
Katimex CABLE GRIPS – SINGLE EYE – GALVANIZED STEEL
Katimex WIRE AND CABLE CONNECTOR GRIPS - SYNTHETIC CORD (WITH KEVLAR) - DOUBLE WOVEN - 900MM
Katimex CABLE GRIPS - SINGLE EYE - GALVANIZED STEEL
Katimex KATI® TWIST PULLING ROD
Katimex CABLE SUPPORT GRIPS - SINGLE EYE
Katimex CABLE SUPPORT GRIPS - OFFSET EYE - GALVANIZED STEEL
Katimex CABLE GRIPS - DOUBLE EYE - GALVANIZED STEEL v2