(+99412) 460 7021
(+99450) 273 2640

Katimex CABLE SUSPENSION GRIP, SINGLE LATERAL EYE WITH THIMBLE


Optimal solutions for quick and safe installation of cables. A lot of suspension grips for industry, wind parks, lifts, cranes are often used under extra ordinary stresses and strains. Suspension grips ensure that cables are safely held in various fields of aplication. Using KATIMEX® highly flexible suspension grips the tension is uniformly spread over the cable. Therefore damages or breaks are avoided, that might happen when fixing the cable commonly with a cable clip. The suspension grips are supplied in zinc coated wire and are equipped with thimbles (available in steel or stainless steel). The pressed sleeves ensure a regular load of the full length of the mesh. The ends of the grips are not soldered or pressed but woven back to the beginning of the cable grip. This avoids injuries and damages of the cable. Productinformation: Cable-Ø : 40 - 50 mm Pulling force : 18.3 kN Breaking load : 54.9 kN Working length : 1000 mm Inner diameter of thimble: 24 mm
You may also be interested in following products ...
Katimex CABLE GRIPS – SINGLE EYE – GALVANIZED STEEL
Katimex CABLE GRIPS - DOUBLE EYE - GALVANIZED STEEL v2
Katimex SWIVEL
Katimex PIPE EEL Ø 9 MM WITH SERVICE SET AND BAG
Katimex KATI® TWIST 2.0
Katimex CABLE GRIPS – DOUBLE EYE – GALVANIZED STEEL
Katimex OVERHEAD CABLE GRIP
Katimex WIRE AND CABLE CONNECTOR GRIPS - SYNTHETIC CORD (WITH KEVLAR) - DOUBLE WOVEN - 900MM
Katimex CABLE SUSPENSION GRIP, DOUBLE EYE WITH THIMBLES
Katimex CABLE GRIP WITH INTEGRAL SWIVEL
Katimex HOSE SECURING GRIP, DOUBLE EYE WITH THIMBLE
Katimex CABLE SUPPORT GRIPS - DOUBLE EYE - GALVANIZED STEEL
Katimex PIPE EEL Ø 11 MM WITH SERVICE SET AND BAG
Katimex KATI® TWIST PULLING ROD
Katimex CABLE GRIPS – DOUBLE EYE SPLIT – GALVANIZED STEEL
Katimex CABLE GRIPS – SINGLE LATERAL EYE – GALVANIZED STEEL