Megger Baker EXP4000
Monitors and assesses conditions across a running “machine system” that impact the health and performance of the motor within the system Evaluates the quality of incoming power fed to motor Assesses motor performance indicators Tracks the amount and condition of load placed on the motor Instrument connection options: at a motor junction box, at the instrumentation cabinet, inside a motor control cabinet (MCC), from outside an MCC (requires a Baker EP1000 (dynamic motor link)) Designed for rugged site use in tight spaces typical of industrial environments AC or battery operation Visual confirmation of motor integrity Facilitates survey of plant-wide motor efficiency Microsoft Windows 7 operating system The Baker EXP4000 is a powerful tool, designed for site use, to analyse the motor running under its normal load. It tracks multiple data types to identify trends that indicate potential problems. Voltage and current are measured and a series of parameters are then calculated, including power quality, rotor bar condition, % load, % operating efficiency, average torque value, torque ripple showing variation within process, monitoring of start-up transients (volts, current and torque), and much more. The EXP4000 enables root-cause analysis, starting with separation of mechanical and electrical issues that may be present in a motor-machine system. By monitoring many different parameters and using advanced software algorithms, the EXP4000 is designed to pinpoint challenges across the system, including those with the power supplied, variable-frequency drive, the motor, and the load placed on the motor. Examples of the wide range of problems it may detect include: wrong settings on a supply transformer's taps, poorly distributed single-phase loads, overloading (saturating) supply transformers, excessive VFDs on low voltage busses, excessive non-harmonic frequencies on a VFD, missing line-inductors on VFD applications and missing or open power factor correction capacitors thermal overloading of the motor current related problems broken rotor bars, mechanical issues, transient overloading, mechanical imbalances along with bearing problems and load issues such as cavitation The Baker EP1000 Dynamic Motor Link is an optional accessory which is installed permanently inside the motor control cabinet (MCC), and which provides a low-voltage connection port on the cabinet’s door. A technician can simply connect the EXP4000 to that port without the need to open the cabinet or power down the motor. This provides obvious safety benefits, as well as improved convenience and productivity where a large number of motors need to be monitored. Through use of the Baker EXP4000, along with a static motor analyser, such as the Baker AWA-IV, maintenance professionals have the means to minimize unexpected failures while maximizing uptime of motors and the machinery that they drive.