Megger MOM2


Hand-held 200 A micro-ohmmeter
  • Up to 220 A
  • Battery powered
  • Light weighs only 1 kg
  • Safe test – DualGround™
  • Auto range: 1 μΩ to 1000 mΩ
  • Bluetoot® PC communication
  • Complies with IEEE and IEC standards
The MOM2 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind. MOM2 uses an ultra capacitor to generate the high output current. The ultra capacitor is able to store a huge amount of energy compared to conventional capacitors and can deliver very high current during the discharge thanks to its very low internal resistance. The microhmmeter can be used anywhere to measure a low resistance value with high accuracy. With MOM2 it is possible to make measurements according to the DualGround™ method. This means that the test object will be grounded on both sides throughout the test giving a safer, faster and easier workflow.
You may also be interested in following products ...
Megger TDR2050
Megger TDR1000/3P
Megger digiPHONE+2
Megger SFX5-1000 and SFX8-1000
Megger Teleflex VX
Megger HPG50-H, HPG70-H, HPG80-H and HPG110-H
Megger HV test set 50 kV, HV test set 80 kV and HV test set 110 kV
Megger VLF Sine Wave 45 kV
Megger Ferrolux Rx
Megger STX 40
Megger TDM45
Megger VLF Sine Wave 62 kV
Megger EasyTest 20 kV
Megger Tan delta attachment
Megger Teleflex® SX-1
Megger TDR2000/3 and TDR2010