Maybo | Mitutoyo

V-Anvil Micrometers – Series 314, 114 –

Series 314 FEATURES Measures the outside diameter of cutting heads(such as taps,reamers, ...

Spline Micrometers – Series 331,111

Series 331 FEATURES IP65 water/dust protection (Series 331). The anvil and spindle have ...

Ratchet Thimble Micrometer Series-101,102

Series 102 FEATURES Ratchet function works both from the thimble and the speeder,allowin ...

Quickmike Series 293-IP-54 ABSOLUTE Digimatic Micr

Series 293 FEATURES The Quickmike provides a speedy spindle feed of 10mm/.4” per thimb ...

QuantuMike Series 293-Coolant Proof Micrometer

Series 293 FEATURES Faster measurement with 2mm per rev. instead of the standard 0.5 A ...

Point Micrometers – Series 342, 142, 112

Series 342 FEATURES IP65 water/dust protection (Series 342). Pointed spindle and anvil ...

Outside Micrometers-Series 340,104-with Interchang

Series 340 FEATURES IP65 water/dust protection 340 series models with a range up to 12in ...

Outside Micrometers-Series 107

Series 107 FEATURES With dial indicator for direct GO/NG-GO judgment for mass-produced p ...

Outside Micrometers Series-105 with Extension Anvi

Series 105 FEATURES Wide measuring range with extension anvil collars. 50mm spindle str ...

Outside Micrometers Series-103 METRIC

Series 103 FEATURES Hammertone-green, baked-enamelfinished frame. Ratchet Stop for exac ...

Outside Micrometers Series-103 INCH

Series 103 FEATURES Hammertone-green, baked-enamelfinished frame. Ratchet Stop or Frict ...

Outside Micrometers – Series 406- Non-Rotati

Series 406 FEATURES with a standard bar except for 0-25mm/0-1in model. With SPC output ...

Outside Micrometers – Series 102

Series 102 FEATURES Heat-insulated frame, tapered (on the anvil side) for hard-to-reach ...

Outside Micrometers – Series 101

Series 101 FEATURES Satin-chrome-finished frame, tapered (on the anvil side) for hard-to ...

MDH Micrometer High-Accuracy Sub-Micron Digimatic

Series 293 FEATURES Enabling .000005”/ 0.1?m resolution measurement, this micrometer i ...

Digimatic Micrometer Series 293 MDC-MX Lite

Series 293 FEATURES Provided only with a zero-set key for easy origin setting. A ratche ...

Crimp Height Type Micrometers – Series 342-1

Series 342 FEATURES IP54/65 water/dust protection(Series 342). Measures the height of c ...

Coolant Proof Micrometer Series 293-with DustWater

Series 293 FEATURES Coolant Proof Micrometers MDC-MX Series Twice as Long Battery Life ...

ABSOLUTE Digimatic Micrometers Series 227-with Adj

Series 227 FEATURES Constant and low measuring force mechanism in the thimble. Adjustab ...

Vernier Height Gage Series 514-Standard Height Gag

Series 514 FEATURES Zero reference point can be adjusted. Stain chrome finished scales ...

Vernier Height Gage – Series 506-Light Weigh

Series 506 FEATURES The Light Weight Height Gage is designed for scribing from a vertica ...

QM-Height Series 518-High Precision ABSOLUTE Digit

Series 518 FEATURES Newly developed high accuracy and high resolution ABSOLUTE linear en ...

Linear Height LH-600EEG – Series 518 -High P

Series 518 FEATURES Excellent accuracy of (1.1+0.6L/600)?m with 0.1?m/0.5?m resolution/r ...

Digimatic Height Gage Series 192-Standard Type wit

Series 192 FEATURES • Switchable resolution (.0002”/0.005mm or.0005”/0.01mm) • ...

Dial Height Gage Series 192-with Digital Counter

Series 192 FEATURES Easy and error-free reading with both up and down digital counters a ...

Depth Gage Attachment

Attached to a height gage to measure groove and hole depth. Minimum hole diameter: 5.5mm ...

The Contact Sensor eliminates errors caused by jacking-up the height gage too much while t ...

CERA Caliper Checker Series 515

Series 515 FEATURES The CERA Caliper Checker is designed to inspect vernier, dial and Di ...